Previous   Next

---

 AMI BIOS setting

This AmiBios Require you to press DEL key to enter setup

AMIBIOS(C)2006 American Megatrends, Inc.
BIOS Date: 03/02/06 20:15:54  Ver: 09.00.07

Press DEL to run Setup

Checking NVRAM..

now you will see some similar screen and choose the BOOT option and choose Boot Device Priority and choose first boot device to CDROM and second boot device to HARD DRIVE You can press F10 to save settings.

BIOS SETUP UTILITY

Main   Advanced   Power   Boot   Security   Exit

 

► Boot-Time Diagnostic Screen: [Enabled]

► QuickBoot Mode:              [Enabled]

► Scan User Flash Area:        [Disabled]

► Boot-Time Diagnostic Screen: [Enable]

► After Power Failure:         [Last State]

► On Modem Ring:               [Power On]

► On LAN:                      [Power On]

► Boot Device Priority

1st Boot Device    [CDROM]

2nd Boot Device    [Hard Drive]

 

► Hard Disk Drives

► Floppy Drives

► CDROM Drives

 

Specifies the boot sequence from the available devices
+ -     Change Option
F1      General Help
F10     Save and Exit

(c)Copyright 1985-2006, American Megatrends, Inc.

---

Previous   Next